Home > News > Company News

Recommended Common Plastic Processing Aids


Recommended Common Plastic Processing Aids

Ethylene Bis Oleamide,EBO

EBO is a synthetic wax. It is used as lubricant, brightener, smoothing agent, anti adhesion agent and release agent in plastics, and antistatic agent for cellophane. This product is suitable for internal and external lubricants of ABS, polystyrene, polyvinyl chloride, nylon, cellulose acetate, polyvinyl acetate and phenolic resin; It is especially suitable for polyethylene and polypropylene films. It can be used as pigment abrasive, pigment dispersant and polyamide paraffin coupling agent. It can improve the compatibility and thermal aging stability of talc filled polypropylene. It can change the compatibility between paraffin and resin. As a release agent, this product can be used for thermoplastic resin in injection molding.

Ethylene Bis Stearamide,EBS

EBS is a new type of plastic lubricant developed in recent years. EBS is widely used in the molding and processing of PVC products, ABS, rubber and plastic products. Compared with traditional lubricants such as paraffin wax, polyethylene wax and stearate, EBS has better lubrication effect, lower energy consumption and higher smoothness of products.

Modify Ethylene Bis Stearamide,Modify EBS

l As a dispersant of polypropylene color masterbatch and ABS Color Masterbatch, it can significantly improve the melt index and surface brightness of color masterbatch;

l It is used as a particularly effective dispersant for pigments such as phthalocyanine blue, phthalocyanine green and carbon black (ordinary and high pigment carbon black);

l It plays the role of polishing and lubrication in recycling ABS, PS, as and other plastics;

l It plays the role of lubrication and anti adhesion in transparent PVC, PP and PE, internal and external lubrication in the processing of PVC wire and cable materials, and external lubrication in elastic PVC materials;

l As brightener and compatibilizer in inorganic filled modified PE and PP, it can improve the brightness, melt index, notch impact strength, bending modulus and breaking strength of the products;

l Hard PVC profiles and pipes suitable for extrusion molding can make the product surface bright;

Ethylene Bis-12-Hydroxystearamide,EBH

l EBH is used as internal lubricant and release agent of plastics. It is suitable for hard PVC, PP, PS, etc. with good transparency. It can be used as lubricant and anti adhesion agent for non-toxic transparent PVC torsional film and transparent PVC particles.

l EBH is used for glass fiber reinforced PA, PBT, pet, PP, PAS, ABS, POM, PC, PPS and other products, and textile glass fiber is exposed. At the same time, it can increase the surface smoothness of the product, improve the melting index, improve the fluidity, reduce the processing temperature, reduce the torque of the screw, reduce the wear of the machine, improve the service life of the machine and cancel the power consumption.

Stearyl Erucamide

Stearyl Erucamide is a white to off-white powder or particle ,Cas No.10094-45-8, melting point 65-85℃. Stearyl Erucamide has excellent high temperature resistance characteristics, especially suitable for high temperature processing of polyolefin plastics, polyamide, polyester and acrylic resins, smooth, lubricating, anti-stick and demoulding. Aosen Stearyl Erucamide has good lubricity and smoothness, excellent thermal stability, and can be used in plastic or resin processing at more than 300℃.

We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy
Reject Accept